21V electric scissors electric pruning machine control board, motor drive controller
Part Name(产品名称 | 三相直流无刷电机驱动器 |
Part No(产品型号) | FD3610-001 |
control technology(控制技术) | FOC矢量控制 |
Rated voltage(额定电压) | 21V |
Voltage Range(允许操作电压) | 15-35V |
Max continuous current(最大连续电流) | 20A |
Max Peak current(最大瞬间电流) | 50A |
Hall Electrical Angle(霍尔电气角度) | 120Degree/无感兼容 |
Product size(产品尺寸) | 70mm*45mm |
Weighe (产品重量) | 32g |
SF speed feedback
| Speed Pulse Output(速度脉冲输出) |
FR | High or not connected=CCW,Low or connected to GND=CW (与GND连接,电机顺时针旋转;与GND断开,电机逆时针运转) |
EN | High or not connected=Running,Low or connected to GND=Stop (与GND连接,电机停止运行;与GND断开,电机正常运行) |
VSP | Input 0-5VDC voltage or PWM pulse(2~50k Hz/5V)to change motor speed,Please make sure the Speed pot on the driver is set on the max to get full spssd. (输入0-5V直流电压或者PWM脉冲信号(1kHz-5V),可以调节电机的转速,如需全速运行请确保驱动器上自带的电位器旋转到最大位置) |
5V | 5V voltage supply(驱动器输入5V直流电压) |
![21V electric scissors electric pruning machine control board, motor drive controller 21V electric scissors electric pruning machine control board, motor drive controller](../upload/202207/1658212150123967.jpg)